Dear Valued Customers:
Subsonic Planes only represents the motors that are built and designed here in our shop. You can only purchase our Motrolfly Motors from us here at Subsonic Planes. 
Motors sold outside our facility are not held to the same standards that we have set for our motors and we are in no way responsible for them.
Thank you


Our shop will be on Vacation 7-27-14 through 7-29-14. please place all orders before 7:00 AM 7-25-14;  orders placed after this time and date will start shipping 7-30-14. We will still be answering emails during this period. subsonicplanes@yahoo.com


Our Motrolfy Brushless Motors are among the best in the world, with High Efficiency ratings and are able to handle more Watts than most other brushless motors in their size. We use High strength Neodymium magnets, high temp wire, and precision CNC machined parts to ensure you get the best performance. Sealed ball bearings on our 2810 and larger motors to ensure Quality and Durability
.
New 0.20 laminated stators in all Motrolfly, except 2215H motors.
Motrolfly Motors are covered under a one year warranty for defects.
Damage due to abuse is not covered under warranty.

Note: Actual amps and performance may be more or less than what is listed and depends on the quality of your batteries. Having an amp meter and testing the motor/prop/battery combination is a must these days any time you test a new set up or use a new battery (especially with a higher C rating) with a given power system even if it has been previously tested.
Important:
Max watts listed are just that, they are the max watts you should not exceed at full throttle on the ground on a fresh pack to keep the motor below the acceptable temperature of 155 degrees Fahrenheit . 
Some motors you may exceed the listed watts if you keep the temp of the motor below the listed limit. This does depend a lot on flying style and ambient temperature. You should not exceed the listed props on motors used for 3D that do not use a concentric bearing. If you have questions on this please ask. Best to ask by email at sales@subsonicplanes.com 
The watts you will see with the listed prop will not be close to the max watts unless you have a pack that will hold at least 4+V per cell.
It is vertually impossible for us to determine what watts you will see when the battery quality, air density, prop brand, and even the brand and individual esc quality can determine the input watts.
MOTROLFLY DM-2203 Brushless motor series are for RC Airplanes 4 to 10 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot.
All 2203 motors come with pre soldered 2.0mm gold connectors and prop saver adaptor (use with FM-6 to FM-10 ESC depending on motor, prop, and voltage combination).
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 17.5 grams
* Stator Width: 22mm
* Stator Height: 3mm
* Stator Laminations: 0.20
* Motor Width: 28mm
* Motor Length: 20mm
* Shaft Length: 20mm
* Shaft Size: 3mm
* 12 tooth 14 magnet DLRK


Price $29.95

DM2203-1100
 Add to Cart 

No Load Current

3s Lipo 40 W

  8x4.3 to 9x4.7 on 3s

Test Results


DM2203-1350
 Add to Cart 

No Load Current
0.31Amps @ 11.23V

2s Lipo 35 W
3s Lipo 40 W

8x3.8 to 9x5 on 2s
6x3 to 7x3.5 on 3s

Test Results


DM2203-1600
 Add to Cart 

No Load Current
0.39Amps @ 12.55V

2s Lipo 50 W
3s Lipo 70 W

7x4 to 8x4 on 2s
6x3 to 7x3.5 on 3s

Test Results


For YB Mini
DM2203-2200
 Add to Cart 

No Load Current
0.65Amps @ 12.20V

2s Lipo 60 W
3s Lipo 90 W

6x3 to 7x3.5 on 2s
4x4 to 5x4.3 on 3s

Test Results



MOTROLFLY DM-2204 Brushless motor series are for RC Airplanes 5 to 12 ounces depending on model type. Check below for more details.
All 2204 motors come with pre soldered 2.0mm gold connectors and prop saver adaptor.

Weight is with connectors, but with out X mount
All up weight is with x mount

The 2204 is a new design using a smaller x mount, 8mm bearing tube, and improved integrated prop adapter.
The new prop adapter will handle all smaller apc and gws props with bores of 4mm, 5.5mm, and 7mm.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 19.5 grams
* All up weight 21.5
* Stator Width: 22mm
* Stator Height: 4mm
* Stator Laminations: 0.20
* Motor Width: 28mm
* Motor Length: 23.75mm
* Shaft Length: 25mm
* Shaft Size: 3mm
* 12 tooth 14 magnet DLRK

                                 

Price $32.95

DM2204-1700
 Add to Cart 

No Load current
0.25A at 11V

2s Lipo 60 W

  8x4 to 8x4.3 on 2s

Test Results



DM2204-2500
 Add to Cart 

No Load current
0.85A at 11V

3s Lipo 100 W

5x4.3 on 3s

Test Results


MOTROLFLY DM-2205
Brushless motor series are for RC Airplanes 7 to 20 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot. 
1350Kv, 1800Kv, and 2150Kv motors come with pre soldered 2.0mm gold connectors and prop saver adaptor (use with FM-10 ESC)
2800Kv comes with pre soldered 3.5mm gold connectors and a collet type prop adaptor (use with FM-20 ESC). Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 28 grams
* Stator Width: 22mm
* Stator Height: 5mm
* Stator Laminations: 0.20
* Motor Width: 28mm
* Motor Length: 23mm
* Shaft Length: 36mm
* Shaft Size: 3mm
* 12 tooth 14 magnet DLRK

 
   Price:   $35.95
 
        2205-1350 Test Results            2205-2150 Test Results            2205-2800 Test Results
 
 

DM2205-1350
  Add to Cart  

F3P planes up to 11 oz.
Park flyers up to 17 oz.

2s Lipo 50 W
 3s Lipo 90 W

9x5 to 10x5 on 2s
7x6 to 8x4 on 3s

More Info
PDF down load


DM2205-1800
  Add to Cart  

 3D planes up to 10 oz.
Park flyers up to 17 oz.

2s Lipo 70 W
3s Lipo 110 W

8x4 to 9x5 GWS on 2s
6x4 to 7x4 on 3s

More info
Coming soon

      

DM2205-2150
  Add to Cart  

F3P planes up to 13 oz.
Park flyers up to 22 oz.

2s Lipo 80 W
3s Lipo 130 W

7x3.5 to 8x4 on 2s
5x5 to 6x4 APC on 3s

More Info
PDF down load

 

  DM2205-2800 
  Add to Cart  

Fast planes up to 14.5 oz.
Park flyers up to 16 oz.

2s Lipo 120 W
3s Lipo 200 W

5x5 to 6x4 on 2s
4x4 to 4.7x4.7 on 3s

More Info
 PDF down load
 


Video 2205-1350 EPP Yak on 3s        Video 2205-1350 Slofly EPP 2s         Video 2205-2800 Superflea 3s

 

MOTROLFLY DM-2210 Brushless motor series are for RC Airplanes 14 to 27 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot. 
1080 and 1400 Motors come with pre soldered 3.5mm gold connectors and prop saver adaptor (use with FM-20 ESC); 1700 (use with FM-20 ESC) and 2200 (use with FM-30 ESC) come with pre soldered 3.5mm gold connectors and a collet type prop adaptor. All come with X mount for mounting the motor. Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 43 grams
* Stator Width: 22mm
* Stator Height: 10mm
* Stator Laminations: 0.20
* Motor Width: 28mm
* Motor Length: 25.5mm
* Shaft Length: 38.6mm
* Shaft Size: 3mm
* 12 tooth 14 magnet DLRK

     
  Pri
ce:   $39.95
 

DM2210-1080
   Add To Cart  

3D planes up to 16 oz.
Park flyers up to 22 oz.

2s Lipo 85 W
3s Lipo 155 W

10x6 to 12x8 on 2s
9x5 to 10x5 on 3s

More Info
PDF down load

 

DM2210-1400
   Add To Cart  

3D planes up to 20 oz.
Park flyers up to 27 oz.

2s Lipo 115 W
 3s Lipo 155 W

 9x5 to 10x8 on 2s
7x6 to 8x4 on 3s

More Info
PDF down load

 

DM2210-1700
   Add To Cart  

Fast planes up to 20 oz.
 Park flyers up to 24 oz.

 2s Lipo 130 W
 3s Lipo 180 W

 8x4 to 9x5 on 2s
  6x4 to 7x5 on 3s  

More Info
PDF down load

 

DM2210-2200
   Add To Cart  

Fast planes up to 24 oz.
Park flyers up to 28 oz.

 2s Lipo 200 W 
 3s Lipo 300 W 

7x4 to 8x4 on 2s
5x5 to 6x5.5 on 3s 

More Info
PDF down load


Video 2210-1080 Flash 3D        Video 2210-1700 Aquastar 3s        Video 2210-2200 FunJet         


MOTROLFLY DM-2215
Brushless motor series are for RC Airplanes 16 to 30 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot. 
Motors come with pre soldered 3.5mm gold connectors and prop saver adaptor (use with FM-20 ESC). Both come with X mount for mounting the motor. Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 58.5 grams
* Stator Width: 22mm
* Stator Height: 15mm
* Stator Laminations: 0.20
* Motor Width: 28mm
* Motor Length: 30.5mm
* Shaft Length: 44mm
* Shaft Size: 3mm
* 12 tooth 14 magnet DLRK

 
  Pri
ce:   $45.95
 

  DM2215-850  
   Add To Cart  

3D planes up to 19.5 oz.
Park flyers up to 27 oz.

3s Lipo 125 W
4s Lipo 160 W

10x7 to 12x6 on 3s
8x4 to 9x6 on 4s

More Info
PDF up load


 DM2215-950 
   Add To Cart  

3D planes up to 21 oz.
Park flyers up to 30 oz.

3s Lipo 200

10x4.7 APC to
  11x4.7 GWS on 3

More Info
PDF up load



 DM2215-1150 
   Add To Cart  

3D planes up to 21 oz.
Park flyers up to 30 oz.

2s Lipo 118 W
3s Lipo 210 W

10x6 to 12x8 on 2s 
8x6 to 9x5 on 3s

More Info
PDF up load


Video 2215-1150 Flash 3D



MOTROLFLY DMH-2215
motors are for RC Helicopters up to 24 ounces or Fast RC Airplanes 21 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot. 
Motors comes with pre soldered 3.5mm gold connectors and mounting hardware (use with FM-30 ESC).
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 52 grams
* Stator Width: 22mm
* Stator Height: 15mm
* Motor Width: 28mm
* Motor Length: 30.5mm
* Shaft Length: 45mm
* Shaft Size: 3.18mm
* 9 tooth 6 magnet DLRK

 
  
Price:   $39.95
 

DMH-2215-3100
   Add To Cart  

Helicopters up to 24 oz.
Fast Planes up to 20 oz.

2s Lipo 200 W
3s Lipo 265 W

6x5.5 to 7x4 on 2s
4.75x4.75 on 3s

More Info
PDF down load

 

DMH-2215-3500
   Add To Cart  

Helicopters up to 24 oz
Fast Planes up to 21 oz.

2s Lipo 265 W
3s Lipo 265 W


 5x5 to 6x4 on 2s 

More Info
PDF down load



MOTROLFLY DM-2610
motors are for RC Airplanes up to  ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot.
Motors comes with pre soldered 3.5mm gold connectors and mounting hardware (use with FM-30 ESC).
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 72 grams
* Stator Width: 26mm
* Stator Height: 10mm
* Motor Width: 34.1mm
* Motor Length: 29mm
* Shaft Length: 53mm
* Shaft Size: 5mm
* 12 tooth 14 magnet DLRK


Price: $49.95

DMH-2610-1200
 Add To Cart

Planes up to  oz.
 Planes up to  oz.

3s Lipo  W
4s Lipo  W

9x6 to 10x5 on 3s
to on 4s

More Info
coming soon


Price: $59.95
This motor is hand wound with large diameter wire in the US for 40 to 45" 3D planes spinning a 11x5.5 APC.

DM-2610-1100
  Add To Cart 

Sport Planes up to 45 oz
3D Planes up to 28 oz.

3s Lipo 350 W

 11X5.5 on 3s

More Info
cooming soon



MOTROLFLY DM-2810
Brushless motor series are for RC Airplanes 32 to 50 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 3.5mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting (use with FM-40 ESC). 
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 91 grams
* Stator Width: 30mm
* Stator Height: 10mm
* Motor Width: 39mm
* Motor Length: 27mm
* Hub Length: 30mm
* Hub Shaft: 6mm x 22mm
* Motor Shaft Size: 5mm
* 12 tooth 14 magnet DLRK

 
  Price:   $64.95
  

  DM2810-830  
   Add To Cart  

3D planes up to 39 oz.
Sport Planes up to 50 oz.

4s Lipo 340 W
5s Lipo 400 W

11x8.5 to 12x6 on 4s
9x6 to 9x7.5 on 5s

More Info
PDF down load

 

 DM2810-1000  
   Add To Cart  

3D planes up to 36 oz.
Sport Planes up to 45 oz.

3s Lipo 380 W
4s Lipo 450 W

 10x5 to 12x6 on 3s  
8x6  to 9x6 on 4s

More Info
PDF down load

 

 DM2810-1200  
   Add To Cart  

3D planes up to 36 oz.
Sport Planes up to 50 oz.

3s Lipo 420 W
4s Lipo 500 W

10x5 to 11x5.5 on 3s 
8x4 to 8x6 on 4s

More Info
PDF down load


Video 2810-1200 3DHS Edge 40" 3s



MOTROLFLY DM-2815
Brushless motor series are for RC Airplanes 40 to 72 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 3.5mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting (use with FM-40 to FM-60 ESC depending on prop and voltage). 
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 123 grams
* Stator Width: 30mm
* Stator Height: 15mm
* Motor Width: 39mm
* Motor Length: 32mm
* Hub Length: 30mm
* Hub Shaft: 6mm x 22mm
* Motor Shaft Size: 5mm
* 12 tooth 14 magnet DLRK

 
 
Price:   $69.95
 

  DM2815-850  
   Add To Cart  

3D planes up to 44 oz.
Sport Planes up to 61 oz.

4s Lipo 530 W
5s Lipo 590 W

10x5 to 11x5.5 on 4s
9x5 to 9x6 on 5s

More Info
PDF down load


  DM2815-950  
   Add To Cart  

3D planes up to 50 oz.
Sport Planes up to 72 oz.

3s lipo 500 W

12x6 to 13x6.5 on 3s


More info
Coming soon


 DM2815-1100 
   Add To Cart  

3D planes up to 50 oz.
Sport Planes up to 72 oz.

3s Lipo 480 W
4s Lipo 625 W

 10x6 to 12x8 on 3s 
 8x6 to 9x5 on 4s

More Info
PDF down load


Video 2815-1100 3DHS Katana 47" 3s         Video 2815-1100 3DHS Katana 47" 3s


MOTROLFLY DM-2820
Brushless motor series are for RC Airplanes 50 to 115 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.
The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 3.5mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting (use with FM-60 to FM-80 depending on prop and voltage).
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 152 grams
* Stator Width: 30mm
* Stator Height: 20mm
* Motor Width: 39mm
* Motor Length: 38.5mm
* Hub Length: 30mm
* Hub Shaft: 6mm x 22mm
* Motor Shaft Size: 5mm
* 12 tooth 14 magnet DLRK

 
 
Price:  $74.95

  DM2820-750  
   Add To Cart  

 3D planes up to 60 oz.
 Sport Planes up to 6 lbs. 

4s Lipo Max 800 W
6s Lipo Max 1000 W

12x6 to 13x6.5 on 4s
10x7 on 6s


 

  DM2820-950  
   Add To Cart  

3D planes up to 60 oz.
Sport Planes up to 6.5 lbs.

3s Lipo Max 800 W
4s Lipo Max 1200 W

13x6.5 to 14x7 on 3s
12x6 to 12x8 on 4s



DM2820-685 and 870 are special hand wound motors and we have to charge more for them.
  Price:  $84.95

  DM2820-685  
   Add To Cart  

 3D planes up to 60 oz.
 Sport Planes up to 6 lbs. 

4s Lipo Max 800 W

13x6.5 to 14x7 on 4s
11x5.5 on 6s



  DM2820-870  
   Add To Cart  

 3D planes up to 60 oz.
 Sport Planes up to 6 lbs. 

4s Lipo Max 800 W

       12x6 on 4s       
10x5 on 5s




Video 2820-950 3DHS Velox 47" 3s



MOTROLFLY DM-2825
Brushless motor series are for RC Airplanes 60 to 112 ounces depending on model type.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 3.5mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting (use with FM-60 to FM-80 depending on prop and voltage). 
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 182 grams
* Stator Width: 30mm
* Stator Height: 25mm
* Motor Width: 39mm
* Motor Length: 42mm
* Hub Length: 30mm
* Hub Shaft: 6mm x 22mm
* Motor Shaft Size: 5mm
* 12 tooth 14 magnet DLRK

 
 
Price:   $79.95
We do not consider this motor to be suitable for 3D airplanes as high gyroscopic forces may cause damage to the motor and ultimately burning up the motor in time.
 

  DM2825-650  
   Add To Cart  

Sport Planes up to 6.25 lbs.

4s Lipo 820 W
6s Lipo 1000 W

14x7 to 14x8.5 on 4s
10x5 to 11x7 on 6s

 

  DM2825-950  
   Add To Cart  

 Sport Planes up to 7 lbs. 

3s Lipo 744 W
6s Lipo 1050 W

14x7 to 15x6 on 3s
9x6 to 9x7.5 on 6s




MOTROLFLY DM-3615 Brushless motor series are for RC Airplanes 56 to 112 ounces depending on model type.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 3.5mm gold connectors, and a 6mm Hub prop adapter. Collet style prop adaptor sold separately for when mounting the motor behind the fire wall...
, motrofly, brushless motor

Optional light version with fiberglass X mount an additional $4.95

     The holes on the x mount of the fiberglass version are slightly smaller than the diameter of the motor in order for them to line up with the holes on the fire wall for 48 to 51" planes. The mounting screws have to be put through the x mount first and then mount the x mount to the motor.
     Or, you can put the screws through from behind the firewall and use nuts in front of the x mount to mount the motor. Just make sure the screws are not too long and go in to the motor or hit the magnets.

     If the aluminum mount is used new holes will most likely have to be made in the fire wall, for some this may be easier than using the fiberglass x mount.

Price: $94.95

Add To Cart

DM3615-750
50" 3D

3D planes up to 4.5 lbs 
Sport Planes up to 7 lbs.

4s Lipo 900 W 

14x7 on 4s

PDF
Coming soon

DM3615-1250
speed planes

Fast Planes up to 5 lbs.

6s Lipo 1800 W 

8x6 Graupner on 6s
150 plus pitch speed

PDF
Coming soon

DM3615-1350
speed planes

Fast Planes up to 4 lbs.

4s Lipo 1500 W 

10x9 gas prop on 4s
100 plus pitch speed

PDF
Coming soon




MOTROLFLY DM-3620
Brushless motor series are for RC Airplanes 80 to 124 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.
The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 3.5mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting.motrolfly, motorfly, motrofly, brushless motors
More info coming soon
 

* Weight: 230 grams (8.1 oz)
* Stator Width: 36mm
* Stator Height: 20mm
* Motor Width: 45mm
* Motor Length: 42mm
* Hub Length: 34mm
* Hub Shaft: 6mm x 26mm
* Motor Shaft Size: 5mm
* 12 tooth 14 magnet DLRK


Pri
ce: $104.95
                                                             Warning
The 3620-750 used for 3D flight will not handle hard 3D maneuvers, damage can result to the magnets and stator if repeated blenders, walls, and tumbles are performed and is not covered under warranty. This motor is meant for light 3D systems where slow light 3D is desired. If you are a "Stick Bash r" go with the 4315 which can handle this kind of abuse.
 

DM3620-750
Add To Cart

3D planes up to 6 lbs 
Sport Planes up to 7.5 lbs.

4s Lipo 1200 W
6s Lipo 1500 W

15x6 to 15x7 on 4s
11x7 to 12x6 on 6s

PDF
Coming soon


DM3620-1000
Add To Cart

  Sport Planes up to 7 lbs. 

 4s Lipo 1200 W
 

 12x6 to 13x6.5 on 4s
                       

DM3620-480
 Add To Cart

3D planes up to 6 lbs 
Sport Planes up to 7.5 lbs.

6s Lipo 1300 W

14x7 APC to
15x7 Xoar on 6s

PDF
Coming soon




MOTROLFLY DM-3625
Brushless motor series are for Sport and Pattern type RC Airplanes 72 to 124 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.
The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting.
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors
We do not consider this motor to be suitable for 3D airplanes as high gyroscopic forces may cause damage to the motor and ultimately burning up the motor in time. Changes to this motor will be made in the future that may make it suitable, but we will make that decision at the time it is tested.

* Weight: 257 grams
* Stator Width: 36mm
* Stator Height: 25mm
* Motor Width: 45mm
* Motor Length: 48mm
* Hub Length: 34mm
* Hub Shaft: 6mm x 26mm
* Motor Shaft Size: 5mm
* 12 tooth 14 magnet DLRK

 
 
Price:   $109.95
 

  DM3625-650  
   Add To Cart  

Sport Planes up to 7.75 lbs.

4s Lipo 1000 W
6s Lipo 1300 W

15x6 to 16x8 on 4s
11x7 to 12x6 on 6s

More Info PDF
down load

 

  DM3625-800  
   Add To Cart  

  Sport Planes up to 7 lbs. 

4s Lipo 1100 W
6s Lipo 1200 W

14x7 to 15x8 on 3s
10x5 to 10x7 on 6s

More Info PDF
down load


DM3625-430 This motor is the replacement motor for the 1600mm starmax P-51, some modification needs to be made to mount the motor, but the prop adapter will fit the stock 4 blade prop.
 Add To Cart 

  Video 3625-650 Harmon Rocket 6s

MOTROLFLY DM-4315 Brushless motor series are for RC Airplanes 5 to12 pounds depending on model type.

Motor comes with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 8mm Bolt on Hub prop adaptor.

*Listed weight is with out x mount, connectors, and hub as most other brands are listed. The all up weight with these components is 11.4 ounces, 323 grams. With optional fiberglass X mount, 10.6 ounces, 300 grams.

*Listed motor length is from the back of the X mount to the hub face.
motrolfly, motorfly, motrofly, brushless motors

* Weight: 280 grams
* Stator Width: 43mm
* Stator Height: 15mm
* Motor Width: 55mm
* Motor Length: 56.2mm
* Fiberglass Ver: 52.00mm
* Hub: 8mm
* Hub Shaft: 8mm
* Motor Shaft Size: 6mm
* 12 tooth 14 magnet DLRK

                  
                   Optional Light mounts both fiberglass and aluminum
                   reduce the all up weight by about an ounce and also
                   match the existing fire wall holes in most 50 to 60"
                   electric airplanes.
   

Pri
ce: $129.95
Optional light Aluminum X mount version no extra charge
Optional fiberglass X mount version an additional $
4.95

Add To Cart 
You will be able to choose the Kv and x mount configuration once you click add to cart.

DM4315-300
8s Lipo

3D Planes up to 7 lbs.
Sport Planes up to 12 lbs.

8s Lipo 1600 W Max
55 amp Max

17x8 on 8s

More Info
Coming Soon

DM4315-380
6s Lipo

3D Planes up to 7 lbs.
Sport Planes up to 12 lbs.

6s Lipo 1550 W Max
70 amp Max

17x8 on 6s

More Info
Coming Soon

DM4315-480
6s Lipo

3D Planes up to 6.5 lbs.
Sport Planes up to 12 lbs.

6s Lipo 1650 W Max
75 amp Max

15x7 to 16x7 on 6s

More Info
Coming Soon

DM4315-500
5 to 6s Lipo

3D Planes up to 6.5 lbs.
Sport Planes up to 12 lbs.

Max 5s 75 amp 1550W
Max 6s 75 amp 1650W

15x8 to 16x8 on 5s
15x7 to 15x8 on 6s

More Info
Coming Soon

DM4315-668
4s Lipo

3D Planes up to 6.5 lbs.
Sport Planes up to 12 lbs.

Max 4s 80 amp 1350W
Max 5s 70 amp 1450W

15x8 to 16x8 on 4s
14x7 to 15x7 on 5s

More Info
Coming Soon

DM4315-714
4s Lipo

3D Planes up to 6 lbs.
Sport Planes up to 12 lbs.

4s Lipo 1350 W
80 amp Max

15x7 to 16x7 on 4s

More Info
Coming Soon

DM4315-780
4s Lipo

3D Planes up to 6 lbs.
Sport Planes up to 12 lbs.

4s Lipo 1300 W
85 amp max

14x7 to 15x7 on 4s

More Info
Coming Soon



MOTROLFLY DM-4320  Brushless motor series are for RC Airplanes 8 to 14 pounds depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. 

The PDF will open in a new window so you don't loose your spot.
PDF COMING SOON
Motor come with an attached X mount not to be removed for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 8mm Hub prop adaptor.
Hold cursor over picture for zoom.
motrolfly, motorfly, motrofly, brushless motors
*Listed weight is with out x mount, connectors, and hub as most other brands are listed. The all up weight with these components is 15.3 ounces, 434.5 grams.

*Listed motor length is the length of the actual motor. The length measuring from the back of the X mount to the face of the hub is 60.60mm or 2 & 25/64 inches.

* Weight: 380g, 13.38 oz.
* Stator Width: 43mm
* Stator Height: 20mm
* Motor Width: 54.8 mm
* Motor Length: 46.0 mm
* Hub Shaft: 8mm
* Motor Shaft Size: 6mm
* 12 tooth 14 magnet DLRK

The X mount on
the 4320 and 4325
is not meant to be removed
Please download and print
this template instead. One will
be provided in the motor box.


4320, 4325 X mount

Price: $154.95
Add To Cart  you will be able to choose the Kv you want in the shopping cart

4320-400Kv

3D Planes up to 9 lbs.
Sport Planes up to 14 lbs.

6s Lipo 1800 W
8s Lipo 2000 W

17x10 to 19x8 on 6s
15x10 to 16x8 on 8s

More Info
Coming Soon

4320-450Kv

3D Planes up to 9 lbs.
Sport Planes up to 14 lbs.

6s Lipo 1800 W

16x10 to 18x8 on 6s

More Info
Coming Soon

Now available in 500Kv and option to buy with out the concentric bearing for Pattern and sport flying. 500Kv to be used with 15x10 to 16x10 on 6s.

Test Results :
4320-400Kv, 18x8 APC E, 23.00V, 72.5A, 1669W, 6781 rpm, 13.2 lbs. thrust.
4320-450Kv, data coming soon

MOTROLFLY DM-4325 Brushless motor series are for RC Airplanes 8 to 16 pounds depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series. 

All motors come with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 8mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting.
Hold cursor over picture for zoom.
otorfly, motrofly, brushless motors

* Weight: 455 grams
* All up weight 500 grams
* Stator Width: 43mm
* Stator Height: 25mm
* Motor Width: 54.8mm
* Motor Length: 52mm
66.3mm X mount to Hub face
* Hub Length: 38.5mm
* Hub Shaft: 8mm x 30mm
* Motor Shaft Size: 6mm
* 12 tooth 14 magnet DLRK

 

The X mount on
the 4320 and 4325
is not meant to be removed
Please download and print
this template instead. One will
be provided in the motor box.

4320, 4325 X mount 

 

 

Price: $174.95
 Add To Cart   You will be able to choose the Kv in the shopping cart.


Actual amps and performance may be more or less than what is listed and depends on the quality of you batteries. Having an amp meter and testing the motor/prop/battery combination is a must these days any time you use a new battery that you have not tested with a given power system.

DM4325-280

3D Planes up to 11 lbs. 
Sport Planes up to 16 lbs.

6s Lipo 2000 W
 8s Lipo 2500 W

Best 8s for 70" 3D
  20x8 on 8s

 More Info 
Coming Soon

DM4325-310 

3D Planes up to 11 lbs. 
Sport Planes up to 16 lbs.

6s Lipo 2000 W
 8s Lipo 2500 W

20x10 to 22x10 on 6s
17x10 to 18x8 on 8s

 More Info 
Coming Soon

DM4325-340 

3D Planes up to 11 lbs. 
Sport Planes up to 16 lbs.

6s Lipo 2000 W
 8s Lipo 2500 W

19x10 to 20x11 on 6s
16x10 to 17x8 on 8s

 More Info 
Coming Soon

DM4325-360

3D Planes up to 11 lbs. 
Sport Planes up to 16 lbs.

6s Lipo 2200 W
 8s Lipo 2500 W

20x10 on 6s
  16x8 on 8s

 More Info 
Coming Soon

 DM4325-380

3D Planes up to 11 lbs. 
 Sport Planes up to 16 lbs.

 6s Lipo 2200 W

Best 6s for 70" 3D

19x10 on 6s

More Info
 Coming Soon

Test Results for the 4325-380:
18x8 APC,     21.7V,     6600 rpm,     59.36 amps,     13.9 lbs. thrust
18x10 APC,   22.0V,     6400 rpm,     71.0 amps,      
16.25 lbs. thrust
19x10 APC,   22.1V,     6125 rpm,     83.77 amps,     17.5 lbs. thrust

 DM4325-450

3D Planes up to 11 lbs.
 Sport Planes up to 16 lbs.

 6s Lipo 2300 W

 16x8 to 18x8 on 6s  

 More Info 
Coming Soon

Test Results for the 4325-450:

16x8 APC,     21.56V,     7500 rpm,     69.01 amps,     12.75 lbs. thrust
17x8 APC,     21.59V,     7425 rpm,     71.72 amps,     14.81 lbs. thrust
17x10 APC,   21.59V,     7125 rpm,     84.3 amps,       17 lbs. thrust
18x8 APC,     21.57V,     7025 rpm,     81.07 amps,     15.75 lbs. thrust

MOTROLFLY DM-4330 Brushless motor was designed for 3D Airplanes 11 to13 pounds 

All motors come with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 8mm Hub prop adapter.torfly, motrofly, brushless motors

* Weight: 500 grams
* All up weight 560 grams
* Stator Width: 43mm
* Stator Height: 30mm
* Motor Width: 54.8mm
* Motor Length: 57mm
71.3mm X mount to Hub face
* Hub Length: 38.5mm
* Hub Shaft: 8mm x 30mm
* Motor Shaft Size: 6mm
* 12 tooth 14 magnet DLRK

 

The X mount on
the 4320, 4325, and 4330
is not meant to be removed
Please download and print
this template instead. One will
be provided in the motor box.

4320, 4325 X mount 

 

 

Price: $194.95
You will be able to choose the Kv in the shopping cart.
 Add to Cart  265Kv through 435Kv

Price: $204.95, these low Kv motors are designed for 12s lipo and are more difficult to wind.

 Add to Cart  195Kv to 225Kv

Actual amps and performance may be more or less than what is listed and depends on the quality of your batteries. Having an amp meter and testing the motor/prop/battery combination is a must these days any time you use a new battery that you have not tested with a given power system.

Max watts listed are just that, they are the max watts you should not exceed at full throttle on the ground on a fresh pack to keep the motor below the acceptable temperature of 155 degrees Fahrenheit .
This is not the watts you will see with the listed prop unless you have a pack that will hold at least 4+V per cell. 

DM4330-240

3D Planes up to 13 lbs.

Max Watts 2700

20x8 on 10s

 More Info 
Coming Soon

DM4330-255

3D Planes up to 13 lbs. 

Max Watts 2700

22x10 on 8s

 More Info 
Coming Soon

DM4330-282

3D Planes up to 13 lbs. 

Max Watts 2700

20x8 to 20x10 on 8s

 More Info 
Coming Soon

 DM4330-298

3D Planes up to 13 lbs. 

Max Watts 2700

19x10 to 20x8 on 8s

More Info
 Coming Soon

 DM4330-400

3D Planes up to 13 lbs.

 Max Watts 2700

19x8 to 19x10 on 6s  

 More Info 
Coming Soon

 DM4330-435

3D Planes up to 13 lbs.

Max Watts 2700

18x8 to 19x8 on 6s  

 More Info 
Coming Soon




MOTROLFLY DM-5320 Brushless motor series are for RC Airplanes 10 to 18 pounds depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.

The PDF will open in a new window so you don't loose your spot. PDF COMING SOON
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 8mm Hub prop adaptor.

motrolfly, motorfly, motrofly, brushless motors

* Weight: 497 grams
* All up weight: 610 grams
* Stator Width: 53mm
* Stator Height: 20mm
* Motor Width: mm
* Motor Length: mm
* Hub : 8mm
* Hub Shaft: 8mm
* Motor Shaft Size: 8mm
* 12 tooth 14 magnet DLRK               


Picture is the new design & with fiberglass X mount


Price: $199.95
Optional fiberglass X mount $9.95, this mount configuration save 42 grams for a total weight of 568 grams
Add To Cart   You will be able to choose the Kv in the shopping cart

For hard 3D flying keep the prop to 19" on 8s and 20" on 6s

DM5320-300

3D Planes up to 13 lbs.
Sport Planes up to 18 lbs.

6s Lipo 2300 W
8s Lipo 2800 W

20x10 to 22x10 on 6s
19x10 to 20x10 on 8s

More Info
Coming Soon

DM5320-330

3D Planes up to 13 lbs.
Sport Planes up to 18 lbs.

6s Lipo 2300 W
8s Lipo 2800 W

19x10 to 20x10 on 6s
18x8 to 19x8 on 8s

More Info
Coming Soon



MOTROLFLY DM-5335 Brushless motor series are for RC Airplanes in the 50cc class.  

This motor uses one 45x58x7 concentric bearing, two 8x19x6, and three 8x16x5 bearings. This provides a truely 
robust and stable bearing system to handle high gyroscopic forces that a 24" prop will produce in 3D flight.

Click here for more info
motrolfly, motorfly, motrofly, brushless motors


* All up weight: 34.4 oz.

* Stator Width: 53mm
* Stator Height: 35mm
* Motor Width: 66mm
* Motor Length: 84 mm from the
   back of the X mount to spinner 
   back plate rest point
* Output Shaft: 8mm
* Motor Shaft Size: 8mm
* 12 tooth 14 magnet DLRK

             


Price: $549.95
Add To Cart   You will be able to choose the Kv in the shopping cart

Please contact us to choose the correct Kv based on the prop you want to use and ESC
subsonicplanes@yahoo.com 


Available Kv now are 195, 189, 175, 145
you may contact us and request a different Kv to be wound and we will try to 
accommodate you

Option for Ceramic Hybrid Bearing set installed for $74.95 is now available.

DM5335-189

3D Planes in the 50cc class

12s lipo
max watts not to
exceed 5200 watts

24x12 Xoar with the Castle Edge
24x9 with the ZTW 120Hv

DM5335-175

 3D Planes in the 50cc class

12s lipo
max watts not to
exceed 5200 watts

  24x12 with the ZTW 120Hv
 24x12 with the Castle Ice Hv



           

Motor Calc
Website Builder